My Intel NUC server just died (whenever it’s plugged in, it makes a buzzing noise, and the external power LED is off (the internal one is on tho)), so I need a new server box. Any recommendations?

I can salvage the RAM (16 GB DDR4) and hard drive (1TB HDD) off of this one, I believe.

  • adr1an@programming.dev
    link
    fedilink
    English
    arrow-up
    30
    ·
    edit-2
    1 year ago

    As others just said, take the challenge of repairing or correctly identify what’s broken. It should be fun, and part of the diy ethos.

    If, you are still going for a new piece for the upgrades…

    Depends very much on your scope. Heck, there’s even aesthetics. Do you prefer AMD or Intel? Don’t you feel like having an ARM and take the challenge of compatible images? Would you need to check the transcoding compatibility for Jellyfin? Are you going fangless? Is one 2.5gpbs eth port enough? Etc.

    That said, check the reviews from https://www.servethehome.com/ they have articles with benchmarks and videos for all the latest nucs and other hardware’s form factor servers.

    Be aware that Intel discontinued the NUCs iirc… but Asus or some vendor might have picked up to grab that market segment.

    Good luck!

    • foonex@feddit.de
      link
      fedilink
      English
      arrow-up
      24
      ·
      1 year ago

      Are you going fangless?

      I would definitely go fangless. I have been bitten enough times. A bite might also transfer viruses. Nowadays I defang all my computers.

      • KairuByte@lemmy.dbzer0.com
        link
        fedilink
        English
        arrow-up
        16
        ·
        1 year ago

        Dude, what the fuck. Defanging is so god damn inhumane. If you want a computer without fangs, you don’t want a computer. You want an SBC.

      • adr1an@programming.dev
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        Actually, only after posting it came to my mind that anyway all intel nukes are fangless. That’s their appeal. So that their bytes leave no marks. Long live the vempire.

    • Sekoia@lemmy.blahaj.zoneOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Well, I fully disassembled it, and I’ve found some components that are heating up a lot and probably making the buzzing noise.

      https://files.catbox.moe/6pazjn.jpg

      However I have no idea what they are, if they’re the problem or some connected component. The label doesn’t return anything, so I think this 'uns a goner :(

      • UltraBlack@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        ask a repair shop. Since the label is the same on the other things around it, they could use a parts tester to determine what it is and then order that part. If you’re in luck, that’s the whole problem. If it’s some other component that failed they could still probably determine and fix it

        • Sekoia@lemmy.blahaj.zoneOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          To be honest, I don’t think it’s worth the bother. This is just an i3-5 something, and I got all the working parts off of it. But it’s good a good idea, thanks!

    • Sekoia@lemmy.blahaj.zoneOP
      link
      fedilink
      English
      arrow-up
      2
      ·
      1 year ago

      Thank you! I’m not gonna try and fix the box itself, but somebody suggested it might be the power supply.

    • ChaoticNeutralCzech@feddit.de
      link
      fedilink
      English
      arrow-up
      4
      ·
      edit-2
      1 year ago

      This is the most likely failed part, yes. If you feel adventurous, you can try repairing it like DiodeGoneWild. Looks like the auxiliary power supply (5V 1A independent of others; powers BIOS chips in standby to allow soft power-on) works but the main one does not. Unplug the connectors, connect the black (GND) and green (ENABLE) wires to signal a POWER ON state and check all the voltage rails. Many units use a powerful 12V supply and step-down converters to create the 5V and 3.3V rails, as well as an inverter for the -12V one – if that’s the case, you can try backfeeding 12 V from another PSU and see if the rest come on. Once you identify the failed power supply, check its primary transistor(s) (big 3-pin components on a heatsink) for a short or open circuit.

    • phillaholic@lemm.ee
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      This was the problem with my Synology recently. System would light up and “click” off over and over again. Replaced the PSU was all it needed.

  • Decronym@lemmy.decronym.xyzB
    link
    fedilink
    English
    arrow-up
    12
    arrow-down
    1
    ·
    edit-2
    1 year ago

    Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

    Fewer Letters More Letters
    NAS Network-Attached Storage
    NUC Next Unit of Computing brand of Intel small computers
    PSU Power Supply Unit
    SBC Single-Board Computer

    4 acronyms in this thread; the most compressed thread commented on today has 13 acronyms.

    [Thread #158 for this sub, first seen 23rd Sep 2023, 12:45] [FAQ] [Full list] [Contact] [Source code]

  • Contend6248@feddit.de
    link
    fedilink
    English
    arrow-up
    10
    ·
    edit-2
    1 year ago

    If you don’t mind it being completely Chinese based, Beelink with their new Intel 12th gen mini PC were my upgrade from the last Shuttle device I’ve used.

    Dual Intel 2.5G NIC plenty of USB and an extremely efficient Intel Alder Lake-N100 with a great price to performance closed the deal for me.

    EQ12-N100 is what i went for, to be exact, there are more powerful options too, if needed.

    • yuuki@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Do you notice any slight problem on EQ12-N100? I was worried about single channel RAM performance.

      • Contend6248@feddit.de
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        Not at all, i use it as a firewall, so i wouldn’t notice anything. I can’t imagine it being a problem, it’s still DDR5

  • rambos@lemm.ee
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    +1 for repair. Its most likely PSU and if you are happy with nuc performance its a shame to throw it away.

      • nutbutter@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        2
        ·
        1 year ago

        You can get a second-hand, that is, used laptop and use that as a server. The hard drive can be connected using an adapter through USB.

      • Valmond@lemmy.mindoki.com
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        A used Lenovo think centre could be a good replacement IMO (they take SODimm, aka laptop ram, just check DDR3 or DDR4) and usually accepts two sticks + a nvmy & a 2.5 HD and usually with lots of usb & ports for screen(s). They come in all types of prices but usually seems to be sturdy and long lived.